OMNISPHERE 1.XX MOD
OMNISPHERE 1.XX PATCH

Press the left most edit button to select Reset Now to confirm.

Press GLOBAL and use the left-most EDIT knob to scroll down to 31.

Is your DAW receiving MIDI from the Prophet X?Īs a last resort, you can reset all Global parameters to the factory defaults by doing the following:.

Make sure that the Edit Layer B button is OFF and unlit.

Make sure the MIDI Channel is set to Ch.1.

Not working? Here are some things to try: The following Prophet X controls have no effect on Omnisphere:

OMNISPHERE 1.XX PATCH

A MIDI icon will appear next to the name of the Patch in the Omnisphere browser if the learning is successful.On the Prophet X, select the patch you wish to use.Select “ MIDI Program Change Learn” from the menu.In the Omnisphere Patch Browser, right-click the name of the Patch you want to load.On the Prophet X, select GLOBAL, navigate to 9.If you want the load Omnisphere Patches from the Prophet X, follow these steps: LOADING OMNISPHERE PATCHES FROM THE PROPHET X In a case like this, to disable Unison in Omnisphere press the UNISON button twice. For example, an Omnisphere patch might have Unison enabled while the UNISON switch in the Prophet X is disabled. As a result, when a patch is loaded in Omnisphere its settings will be different than those in the panel of the Prophet X. The communication between the Prophet X and Omnisphere is one-way: the Prophet X sends information to Omnisphere, but not the other way around. If you activate SYNC and then engage a pitch modulation to OSC 1, you will need to disable and re-enable SYNC to get the expected behavior.This means, for example, that you can tune the oscillators a fifth apart and still obtain “hard sync” sounds. When SYNC is activated, the frequency of the oscillator in Omnisphere’s Layer C is not slaved to the frequency of the one in Layer D.When using SYNC, keep in mind the following: This allows you to create sounds that go beyond what’s possible in most hardware synths. Omnisphere’s oscillators have their own Hard Sync parameter, which is independent from their frequency. SIZE affects the BPM speed at which the grains are triggered. When LOOP MODE is set to SYNC, the knobs work as follows: When LOOP MODE is set to PITCH, the knobs work as follows: When LOOP MODE is set to REGULAR, the knobs work as follows: Please contact Tech Support if you have any questions. INSTRUMENT scrolls through different Soundsources.Ībleton Live Users: Because of the unique way Ableton Live processes NRPN messages, Soundsource browsing in Omnisphere from the Prophet X might not be optimal in all cases. TYPE scrolls through Soundsource categories. You can browse Omnisphere Soundsources using the TYPE and INSTRUMENT knobs for INSTRUMENT 1 and 2. OSCILLATOR 2 affects Layer D (synth-based). OSCILLATOR 1 affects Layer C (synth-based). INSTRUMENT 2 affects Layer B (audio-based). INSTRUMENT 1 affects Layer A (audio-based). If you want to modulate certain layer-specific parameters, like level or pan, set the Signal Path to Normal. In Shared Mode, Layers share certain sections of the audio path, including the Filter and VCA. The Prophet X profile loads with the Signal Path set to Shared Mode in order to conserve CPU resources. Here’s a quick overview of how we set up this profile: This means that some controls perform special functions that expand the capabilities of the hardware. The Prophet X is a top of the line synth and also an incredible controller for Omnisphere! In designing this hardware profile, we made decisions to achieve a balance between being faithful to how the Prophet X works and using its panel creatively to make the most of it for controlling Omnisphere.

OMNISPHERE 1.XX MOD

To use the touch sliders as modulation sources, press and hold ASSIGN MOD SOURCE and touch either of the sliders.

Omnisphere 1.xx